ABB OmniCore E10 - 6.3.5 Troubleshooting the computer and logic unit

6.3.5 Troubleshooting the computer and logic unit
Location
The illustration shows the location of the computer and logic unit in the controller.
xx2100001325
LEDs
The illustration below shows the LEDs on the computer and logic unit:
xx2100001559
Continues on next page
Product manual - OmniCore E10 193
3HAC079399-001 Revision: C
© Copyright 2019-2022 ABB. All rights reserved.
6 Troubleshooting
6.3.5 Troubleshooting the computer and logic unit