5.2.3 Replacing the power unit
Location
The illustration shows the location of the power unit in the controller.
xx2100001324
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore E10 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC30873HAC074985-001Power unit
3HAC078253-001Harness Signal cable assembly
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 202.
-Standard toolkit
-ESD protective wrist band
Continues on next page
128 Product manual - OmniCore E10
3HAC079399-001 Revision: C
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.3 Replacing the power unit
To Next Page
Loading...
