ABB OmniCore E10 - 3.4 On-site installation

3.4 On-site installation
3.4.1 Required installation space
Dimensions
The following illustration shows the required installation space for the OmniCore
E10 controller. A free space is required for connecting ABB cables. Do not place
any cables over the left and right covers as it leads to inefficient cooling.
545 mm
50 mm
50 mm
390 mm
50 mm
150 mm
xx2100001296
RightLeftBackFrontFree space
50 mm50 mm50 mm150 mmBase-mounted
50 mm50 mm50 mm150 mmRack-mounted
Continues on next page
Product manual - OmniCore E10 51
3HAC079399-001 Revision: C
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.4.1 Required installation space