ABB OmniCore E10 - 5.4 Replacing parts on the FlexPendant

5.4 Replacing parts on the FlexPendant
5.4.1 Replacing the power cable and power cable cover
Location
The illustration shows the location of the power cable, power cable gasket, and
power cable cover in the FlexPendant.
A
B
xx1800001154
Power cable coverA
Power cableB
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore E10 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC077870-001Harness TPU adapter
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 202.
-Standard toolkit
Continues on next page
Product manual - OmniCore E10 157
3HAC079399-001 Revision: C
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the power cable and power cable cover