ABB OmniCore E10 - Page 127

Note/IllustrationAction
xx2100001330
Reconnect:
• G1/G2.X1
5
Concluding procedure
Note/IllustrationAction
Refitting the controller cover on page 121.Refit the top cover.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 110.
2
Product manual - OmniCore E10 127
3HAC079399-001 Revision: C
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.2.1 Replacing the small fans
Continued