Location of FlexPendant connector
xx2100001304
Detaching the FlexPendant in automatic mode
Use the following procedure to detach the FlexPendant in automatic mode:
1 On the status bar, tap the QuickSet button.
2 Tap the Logout/Restart tab.
3 In the FlexPendant section, tap Detach FlexPendant.
Continues on next page
76 Product manual - OmniCore E10
3HAC079399-001 Revision: C
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.5.6 Detaching and attaching a FlexPendant
Continued
To Next Page
Loading...
