Inverter switch-off
Some parts may be very hot and could cause burns.
Some inverter parts may be subject to voltages that could be hazardous for the operator.
Before performing any work on the inverter, follow the procedure for turning off the inverter.
AC and DC wiring box version (Standard)
• Open the DC disconnect switch and the AC disconnect switch installed
by the Client on the outside of the inverter.
• Disconnect any power supplies that may be connected to the
congurable relay.
Before attempting any work on the inverter, wait enough time for the
stored energy to be discharged
• Remove the front covers
08
Under these conditions the wiring box does not have any hazardous
voltages and all areas may be freely accessed.
To Next Page
Loading...
