Aurora Manager LITE - Advanced configuration software
For the characteristics and functions that Aurora Manager LITE makes
available is indicated for:
1. Local monitoring of the inverter.
It is possible to monitor the main parameters relating to:
- General state
- Statistical data relating to the production of energy
- Input and output values
- Internal temperature
- Values relating to the insulation of the photovoltaic generator
- Date and time
2. Advanced conguration of the inverter (INSTALLER access level):
Offers the option of applying advanced settings for the inverter.
Access to this section of the software is password protected as
it permits the modification of sensitive parameters such as those
relating to the standard for connection to the grid in force in the
country of installation.
The password can be obtained by registering on the site
https://registration.abbsolarinverters.com/
3. Updating of the inverter rmware.
Updating the inverter Firmware is process which may become
necessary to improve the performance of the inverter or increase
its functions.
In order to use the software a connection must be established between the PC and the
inverter (by means of an RS485 communication line) using a PVI-USB-RS485_232 signal
converter.
In all cases, the use of ABB products is recommended to avoid problems of incompatibility
with the inverter.
To Next Page
Loading...
