ABB Welcome IP - Page 50

To Next Page

To Previous Page

Connection, installation / mounting

System Manual

│

2. When the installation box is set:

■

Establish the connection on the device.

■

Mount the device into the installation box.

– Push the device into the lateral holders of the installation box and press down.

Main Page

Table of Contents2
Overview5
Introduction Toabb-Welcome IP5
Fundamentals of Structured Cabling7
Basic Principles7
Wiring of a ABB-Welcome IP System11
Ports a Services in a ABB-Welcome IP System13
Major Projects14
Overview of Product Range15
Outdoor Stations15
Devices15
Installation Boxes17
Individual Assembly Arrangement20
Indoor Stations IP Touch 7 and Guard Unit22
Devices22
Installation Boxes24
System Devices27
Poe Switch Selection28
Onsite Devices31
Door Opener31
Connection, Installation / Mounting32
Outdoor Stations: SM Installation Boxes32
Outdoor Stations: FM Installation Boxes and Plastered Boxes34
Mounting in Insulated Facades34
Mounting in Clinker Facades36
Mounting in Hollow Walls37
Outdoor Stations39
Mounting39
Dismantling40
Name Plates41
Indoor Stations IP Touch: SM Installation Boxes42
Indoor Stations IP Touch: FM Installation Boxes and Plastered Boxes44
Mounting in Solid Walls44
Mounting in Hollow Walls47
Indoor Stations IP Touch49
Wall Installation in Installation Boxes49
Guard Unit52
Wall Mounting52
Installation Recommendation55
Dimensional Drawings56
Outdoor Stations56
Indoor Stations IP Touch56
Installation Boxes - Surface Mounting57
Installation Boxes - Flush-Mounted Installation59
Plastered Boxes61
Commissioning62
Overview of Commissioning62
Commissioning of a System - Step 1: Local Addressing63
Fundamentals of Physical Addressing ABB-Welcome IP63
Physical Addresses - Preparing Addressing67
Indoor Stations IP Touch 7 and Guard Unit68
Outdoor Station with Display70
Outdoor Station with Push-Buttons77
IP Switch Actuator81
Commissioning of a System - Step 2: Commissioning "Smart Access Point83
Overview83
Connecting a PC with the "Smart Access Point83
Preliminary Information: Selection of the System Mode87
Commissioning the "Smart Access Point89
Commissioning a System - Step 3: Searching and Certifying102
Overview102
Preliminary Information: Adjusting IP Addresses to a PC103
Reconnect the "Smart Access Point105
Adding Via Automatic Search108
Defining Trustworthy Devices110
Backup / Restore the Project111
Adding Devices Manually in the "Smart Access Point112
Delete Device in the "Smart Access Point116
RESET (Reset System / Devices)117
Indoor Stations IP Touch 7 and Guard Unit117
Outdoor Station with Buttons / Display118
IP Switch Actuator119
Smart Access Point120
Setting up the Doorbell Buttons of the "IP Pushbutton Outdoor Station122
Setting up Name Entries in the IP Touch 5" Outdoor Station124
Introduction124
Adding Name Entries124
Changing Name Entries129
Several Name Entries for a IP Touch 7134
Change Devices / Change Physical Address137
Case Studies138
Legend138
Private Apartment139
Adding a Unit Network / Indoor Stations to a Unit144
Introduction144
Point-Point Connection / LAN-LAN146
Connection of Poe Switch / LAN-LAN148
Connection of Router / LAN-LAN150
Connection of Router / WLAN-WLAN152
Practice-Oriented Examples154
One-Family House with a Panel154
One-Family House with Three Panels156
Multifamily House with 10 Parties159
Multifamily House with a Floor Door in a Separate Building Wing163
Multifamily House with Units Doors167
One-Family House with Camera171
Multifamily House with 10 Parties and Camera174
One-Family House with ABB-Welcome IP and Free@Home177
One-Family House with ABB-Welcome ® App179
Perimeter181
Glossary187
Notes188
Index189

ABB Welcome IP - Page 50

Table of Contents

Other manuals for ABB Welcome IP

Related product manuals