ABB Welcome IP - Page 93

Commissioning
System Manual
│
93
Fig. 70: Commissioning "Smart Access Point": Connection to the local network
6. Connection to the local network
– Attention! Do not skip this step if devices are to be integrated now or later into the ABB-
Welcome IP.
For the application of the "Smart Access Point" in the "ABB-Welcome IP" system a
selection of the type of connection is absolutely necessary. Even when no connection to
a local network is planned. If this step is skipped, no devices can be added to the
system after commissioning.
If currently no connection to a local network is currently planned, select "LAN" or "WIFI".