AccuEnergy AcuRev 1300 - Display Coding Table

27
AcuRev 1300
All of the meter supported parameters display are in the table below:
Table 3-2 Display coding table
Page No.
Setting ag Content Model
1
Model
2
Model
3
Model
4
1 Voltage wiring detection √ √ √ √
2
Current connection
detection
√ √ √ √
3 Instrument address √ √ √ √
4
RS485 communication baud
rate
√ √ √
5
RS485 communication way
of checking
√ √ √
6 Hardware version √ √ √ √
7 Software version √ √ √ √
8 The release date √ √ √ √
9
specications
√ √ √ √
10
The input active power
√ √ √ √
11-13 1
optional display ag word1
- Bit0
The input active power (A -
C)
√ √ √ √
14-16 8
optional display ag word1
- Bit7
The voltage (A - C)
√ √ √ √
17-19 9
optional display ag word1
- Bit8
Current phase (A - C)
√ √ √ √
20 10
optional display ag word1
- Bit9
Line current
√ √ √ √
21
11
optional display ag word1
- Bit10
The system active power
√ √ √ √
22-24 12
optional display ag word1
- Bit11
Shunt active power
√ √ √ √
25 16
optional display ag word1
- Bit15
frequency
√ √ √ √
26 17
optional display ag word2
- Bit0
The temperature
√ √ √ √