57
AcuRev 1300
From 101H, we can see if the sealing state is valid. When the sealing key is invalid, the
address displays open sealing state. When the sealing is valid, the address displays closed
sealing state, and the corresponding content would be shield.
209H Sealing optional content
Bit0: TOU setting sealing or not
Other bits are reserved
1:enable
0:disable
Note: The contents of the following table to play "√" address, communications, key
exception write operation will return an error code 02H. And you can not change the
corresponding content.
Seal standard content:
Address Parameter description Communication Key
203H Pulse quantity choice √ √
204H Demand calculation √ -
205H Demand calculation cycle √ -
206H Slip the time demand calculation √ -
207H Reactive power calculation method √ √
208H VAR/PFstatute √ -
209H Seal the optional content √ -
213H Remove electric meter data (except
the data on removal of demand)
√ -
216H Measuring side to choose √ √
217H Connection mode √ √
218H CT2 √ √
219H CT1 √ √
220H CTN √ -
221H PT2 √ √
222H~223H PT1 √ √
To Next Page
Loading...
Need help?
General
