44
AcuRev 1300
a) The currentrate ofvaluefrom theinternalclock
TOU energy time segment setting: at most 14 time blocks.Each block corresponds one
segment table (at most 8 time segment tables). Each segment can point to anyone of the 4
rates.
User can use dierent time block, dierent time segment to full personality demand.
But to make sure the time is valid, the meter would examine the time setting strictly. If it
is correct and has opened the TOU function, the meter would process the TOU calculate
energy. If it is wrong and has opened the TOU function. The energy just cumulated to rate 1.
Time setting demands:
1. Number of time zone setting: after nishing the time zone number setting, the time
zone would be divided according to the number of the time zone. Please attention that the
time zone number should be integers from 1-14. And the time zone format should be open
from small to large.
2. Time zone setting format: xx month-xx date, xx date time list. Only if the time zone
be set according to the closed structure, it considered correct.
3. Date time segment meter's setting: The setting parameters of date time segment
meter are interger from 1-14, after finishing the setting, the date time segment's
parameters in the date time segment meter would be set in a increasing order according to
the date time segment meter's setting.
4. Date time segment setting: the parameter should be integer from 1-14, after the
setting finished, we can set the parameter in the date time segment table according to
the set parameters.Only if the date time zone be set according to the closed structure, it
considered correct.
5. Rate setting: the parameter should be integer from 1-4. It means the maximum that
appeared in the TOU energy. After nishing the setting, it would be rate setting in the time
To Next Page
Loading...
Need help?
General
