Acteon X-MIND unity - System Components

  !"##"$"%"&%*""# 
XM_unity_Installation&Maintenance_Manual Ed.1.3c2013 Page (Cof (()
(4@4D$&#/%/E
For a standard installation of the medical device XMIND unity, the following tools are needed:
1. Drill
2. Wall tips of various size.
3. Paper tape or similar to fix template to the wall.
4. Spirit level.
5. Flexometer.
6. Set of screwdrivers, flat and cross type.
7. Click wrench (suggested dynamometer click wrench to check torque of anchor bolts).
8. Series of metric socket wrenches with extension tube.
9. Series of metric Allen keys.
10. Scissors or cable stripper.
11. Necessary tools and components to install ring and ferrules.
12. True RMS Calibrated Multimeter.