!"##"$"%"&%*""#
XM_unity_Installation&Maintenance_Manual Ed.1.3c2013 Page CAof (()
C4(4 DE
H!DE
J
'#&!?**(
It is available an advanced settings menu for SERVICE that allows only the authorized Installer to set and verify some parameters of
the device.
1. Press and keep pressed keys and for 5 seconds till the message “SET” is shown on the display.
2. After a couple of seconds is shown the first parameter, in the bottom part of the display is shown the name of the
parameter.
3. Use keys to scroll parameters.
4. When it is shown the desired parameter press
key to enter the under menu.
5. Icons start blinking.
6. Use keys to scroll available settings.
7. Press key to confirm and save the selection.
8. Press key to exit from menu, or wait some seconds without pressing buttons to automatically exit..
To Next Page
Loading...
