Acuity Controls nLight ECLYPSE - Planning a Wireless Network

Wireless Adapter
NOT to be installed
inside the panel
Wireless Adapter
installed on top or
side of panel
Figure13: Wi-Fi Adapter Position with Metal Relay Panel/Utility Box
Planning a Wireless Network
A wireless network can be installed in many different types of floor spaces, large or small: office space, commercial space,
residential space, etc. The following provides an example on how to start planning a wireless network such as a large of-
fice space. This type of planning can also be used with smaller areas.
1. Retrieve a copy of your floor plans and a compass.
Figure14: Copy of floor plan and a compass
2. Mark relevant radio shadings into floor plan such as: fire protection walls, lavatories, staircases, elevator shafts and
supply areas.
Connecting IP Devices to an IP Network
26
nLight ECLYPSE