Acuity Controls nLight ECLYPSE - Configuring ECLYPSE Wi-Fi Adapter Wireless Networks; Setting up a Wi-Fi Client Wireless Network

CHAPTER 9
Configuring the ECLYPSE Wi-Fi Adapter Wireless
Networks
The ECLYPSE Wi-Fi Adapter supports a number of wireless network connection modes. This chapter describes how to
configure a controller’s wireless network. See also ECLYPSE Wi-Fi Adapter Connection Modes.
Setting up a Wi-Fi Client Wireless Network
This connects the controller as a client of a Wi-Fi access point. See Wi-Fi Client Connection Mode for more information.
Figure85: Client Wireless Network Settings
Configure the controller’s ECLYPSE Wi-Fi adapter mode as a Wi-Fi client as follows.
1. Set Wireless to On.
2. Set the Mode to Client.
3. Click the Find Network icon
to search for available access points that are within range. The access points are
listed on the right.
Configuring the ECLYPSE Wi-Fi Adapter Wireless Networks
84
nLight ECLYPSE