Figure55: Client Settings - SSO
Item Description
Type Server type
Server IP Address
Server IP address of the SSO server. This is the IP address of the ECLYPSE controller that was configured as the server.
Note:
An SSO server must be configured with a static IP address. If the SSO server IP address changes, you will have to
reconfigure all SSO clients with the new IP address. See Ethernet.
Server Https Port Server HTTPS port of the SSO server. By default, this port is set to 443.
Access Token
Server access token of the SSO server. If the server access token changes, this parameter should be updated by the user
accordingly.
In the
Access Token
field, enter the access token belonging to the Server. To do so, go to
Server Settings
, copy the access
token using the copy icon
and paste (CTRL+V) into the
Access Token
field in
Client Settings
.
Recovery Password /
Confirm Recovery
Password
Define a recovery password to access the controller in recovery mode if ever the server is unavailable. See Single Sign On
(SSO) Troubleshooting.
Click the show password icon
to see the password you are entering.
In order for the recovery to work, we highly recommend you do not forget your recovery password. If so, a factory
reset will be required.
Click to copy the access token to the clipboard.
Click to refresh the information in the list.
Apply Click
Apply
to apply and save the changes.
ECLYPSE Web Interface
61
nLight ECLYPSE
To Next Page
Loading...
Need help?
General