Doc : AM220-001E Release: 1.5 updated : October 2014
Report filename
If a specific filename prefix has to be used for LAN storage, set it in the Filename Prefix window. If this
option is set, the specified prefix will be added upfront of the report filename. Maximum length for this
prefix is 3 characters.
Filename extension can be selected of .CSV and .TXT
Report filename is generated automatically and has the following structure:
PPPYYYYYYYYYY-SPXXX.csv
Where,
PPP – prefix (if set)
YYYYYYYYYY – is date and time of the test coded in Windows format
SPXXX is the SP 10 serial number
Report types
Each test report will be transmitted and stored as an individual ASCII file. The file contains multiple lines
with a label and data separated by “;”. The decimal point is a dot.
Depends on the information required, the SP 10 offers two types of report formats.
Type 1 Report – contains minimal essential details about test result. The file format is as below:
Type 2 Report – contains all detailed information about the test. The file format is as below:
Sample Test Verification sample Test
To Next Page
Loading...