Doc : AM220-001E Release: 1.5 updated : October 2014
ANALYZER UNPACKING
Care in Unpacking
After unpacking, verify the unit and its accessories as well as any possible damage sustained in transit,
which must immediately brought to the attention of the carrier so that a statement of damage can be
made.
If equipment damage exists, keep the equipment, crates and packaging materials and file a claim with the
final carrier. Usually, the carrier will send an inspector to ascertain liability.
Send a copy of the claim to AD Systems or to its local distributor.
Please refer to the following website to get address details: www.adsystems-sa.com
Note: Do not return the analyzer or any part to the factory without factory authorization.
Packing list:
1 x SP 10 Instrument
1 x standard test candle with wick tube
1 x Power cord
1 x Operating manual
The various parts of the analyzer are carefully verified and tested before shipping. Nevertheless, it is
worth verifying that the equipment received corresponds to the packing list enclosed.
License notice:
The SP 10 is using a Windows XPE
ļ
platform. The license label is located inside the lower part of the
electronic cabinet under the CPU board. Please do not remove this sticker!
To Next Page
Loading...