Doc : AM220-001E Release: 1.5 updated : October 2014
Precautions in use:
Use only candles and wick tubes supplied by AD Systems
Center the candle on the candle foot print on the conveyor
Be sure that candle stands vertically and not inclined.
Be sure that wick is straight and not inclined
Keep space around the candle conveyor free of any objects, for a free up and down movement.
Don’t touch the candle conveyor during the test
Prevent any air draft around of the apparatus during the test run
Description of the SP10 screen during the test phase:
Test interruption
When it is necessary to abort a test in progress, press the STOP button. A dedicated message will ask for
confirmation of the test interruption.
IMPORTANT! Wait until the candle is released.
Sample and
test
information
To Next Page
Loading...