AD Systems SP 10 - MAINTENANCE; Lamp cleaning

Page 43
Doc : AM220-001E Release: 1.5 updated : October 2014
MAINTENANCE
The SP 10 does not require specific maintenance.
The digital video camera is installed inside the instrument in a special dust protecting cabinet. The camera
is isolated from the lamp by a window made of special optical glass with anti-reflection coating.
Lamp cleaning
CAUTION! Do the lamp interior cleaning only in case of real need.
In order to remove the lamp from the instrument, proceed as follow:
1. Disconnect the igniter plug.
2. Remove the holding screw (don’t lose the spacer)
3. Remove 3 screws holding the lamp body on the bottom.
4. Slide the lamp body and move it up
The lamp interior can be delicately cleaned with a cloth.
C
o
n
s
e
c
u
t
i
v
e
s
m
o
k
e
p
o
i
n
t
o
b
s
e
r
v
a
t
i
o
n
s
T
i
m
e
o
f
t
h
e
t
e
s
t
s
t
a
r
t
S
T
O
P
b
u
t
t
o
n
t
o
i
n
t
e
r
r
u
p
t
2
Flame
image
observed
by the
camera