Play Mode
After the tubes have warmed up, the display will say something like this:
Notice that the LEDs in the PRGM EDIT and SYSTEM EDIT buttons are both unlit. The MP-2
is now in Play
mode. The top line indicates that the MP-2 is currently running User program
1, while the bottom line is the program's name.
Recalling Programs
Recalling programs in Play mode is as simple as could be: To step through
programs:
• Press the "
∧" and "∨" (up and down arrow) buttons to increment and decrement
the program number. When the arrow button is released, the new program is recalled.
• Try pressing the " ∧ " button a few times and watch the User program number
increase.
Play through a few of the User programs to see that the programs are actually changing.
• Press the "∨" button until you reach User program 1, then press it one more
time.
Note that the MP-2 "wraps around" to the highest number, User 128.
Page: 19
To Next Page
Loading...
