Chapter 2: Installing Adaptec Storage Manager ● 21
Installing on UnixWare or OpenServer
Note: If a previous version of Adaptec Storage Manager is installed on your system, you must
remove it before beginning this installation. Any customization files you created with the previous
version are saved and used in the upgrade. To remove Adaptec Storage Manager, type the
pkgrm
RaidMan
command.
To install Adaptec Storage Manager:
1 Insert the Adaptec Storage Manager Installation CD.
2 Mount the Adaptec Storage Manager Installation CD:
mount -r -F cdfs /dev/cdrom/cdromdevicefile /mnt
where
cdromdevicefile
is the device file name (for example,
c0b0t010
for a CD-ROM
block device). To find the device file name, look in the /dev/cdrom directory.
3 Install Adaptec Storage Manager:
For UnixWare
pkgadd -d /mnt/unixware/manager/RaidMan.ds
For OpenServer
pkgadd -d /mnt/openserv6/manager/RaidMan.ds
4 Follow the on-screen instructions to complete the installation.
5 Unmount the Adaptec Storage Manager Installation CD:
umount /mnt
Installing on Solaris
Note: If a previous version of Adaptec Storage Manager is installed on your system, you must
remove it before beginning this installation. Any customization files you created with the previous
version are saved and used in the upgrade. To remove Adaptec Storage Manager, type the
pkgrm
RaidMan
command.
To install Adaptec Storage Manager:
1 Insert the Adaptec Storage Manager Installation CD.
The CD mounts automatically. (If it doesn’t, manually mount the CD using a command
similar to the one shown below. Refer to your operating system documentation for
detailed instructions.)
mount -F hsfs -o ro/dev/dsk/c1t0d0s2/mnt
2 Install Adaptec Storage Manager:
pkgadd -d/ <mount point>/solaris_x86/manager/StorMan.pkg
3 Follow the on-screen instructions to complete the installation.
4 Eject or unmount the Adaptec Storage Manager Installation CD. Refer to your operating
system documentation for detailed instructions.
To Next Page
Loading...
