Adaptec 5405 - Page 29

Chapter 3: Building Your Storage Space ● 29
Linux
1 Type the following command to change to the Adaptec Storage Manager installation
directory:
cd /usr/StorMan
2 Type the following command and press Enter:
sh StorMan.sh
3 When the Log In dialog box appears (see page 28), enter your LAN user name and
password, then click Connect. (See Understanding Permission Levels on page 27 for more
information.)
4 If Adaptec Storage Manager detects a new controller on the local system, the New
Hardware Detected window opens. Click Register Now, then follow the on-screen
instructions to complete the registration.
5 Continue with Enabling Statistics Logging in Adaptec Storage Manager on page 30.
UnixWare or OpenServer
1 Change to the directory where Adaptec Storage Manager is installed:
cd /opt/RaidMan
2 Launch the Adaptec Storage Manager script:
sh RaidMan.sh
3 If prompted, register the controllers on the local system.
4 Continue with Enabling Statistics Logging in Adaptec Storage Manager on page 30.
Solaris
To start Adaptec Storage Manager:
1 Change to the directory where Adaptec Storage Manager is installed:
cd /usr/StorMan
2 Launch the Adaptec Storage Manager script:
sh StorMan.sh
3 If prompted, register the controllers on the local system.
4 Continue with Enabling Statistics Logging in Adaptec Storage Manager on page 30.
FreeBSD
1 Change to the directory where Adaptec Storage Manager is installed:
cd /opt/StorMan
2 Launch the Adaptec Storage Manager script:
sh StorMan.sh
3 If prompted, register the controllers on the local system.
4 Continue with Enabling Statistics Logging in Adaptec Storage Manager on page 30.