ADS TRITON+ - Page 247

Sensor Installation and Connection 5-41
Quantity
Description
ADS P/N
point)
cable)
2
Up to 2
(1 per
monitoring
point)
Surface Combo Sensor – downward ultrasonic
depth sensor, surcharge
pressure depth
sensor, surface velocity sensor, surcharge
velocity sensor and air temperature sensor
8K-CS5-V2-xx-
30/1H
(30-ft./9.1
-m
or 100-ft./30.5-
m
cable)
2
Up to 2
(1 per
monitoring
point)
Ultrasonic depth sensor and air temperature
sensor
8K-CS5-D1-00-30
(
30-ft./9.1-m
cable)
1 as
needed
IS Standard or Custom Sensor Extension
Cable for Ultrasonic Depth Sensor
8000-0023–xxx
3
1 as
needed
IS Standard or Custom Sensor Extension
Cable
for Peak Combo and Surface Combo
Sensors
8000-0025–xxx
3
1 as
needed
Bracket, mounting, sliding, for ParaDepth,
ParaFlow, Surface Combo or Ultrasonic Depth
Sensors (mounting plate)
8000-0307-02
1 as
needed
Adapter, silt mount for Peak Combo Sensor
8000-0271
1 as
needed
Special Surface Combo Sensor/Ultrasonic
Depth Sensor install band, SS, 12 in. long (Use
with corresponding mounting plate 8000
-
0307-
02)
700-100238-00
As needed
by length
Stainless steel mounting band
Contact ADS
1 as
needed
Sensor surcharge bracket (used only to mount
Ultrasonic Depth Sensor in manhole)
I40-0010
as needed
¼. In. u 2 ¼ in. (M6 x 55mm
) stainless steel
anchor bolts w/ nuts and washers
1
Replacement dryer tube
3704–0032
1
IS PC Communication USB Serial Cable
8000-0337
1
Antenna for wireless communication
3800-0162 or
3800-0163
1 as
needed
Magnet (
for activating diagnostic codes
in the
monitor through the LED STATUS window)
8000-0460
1 as
needed
External Power and Communications Unit
(ExPAC)
8000-0377
1 as
needed
24V DC power supply
508293