ADS TRITON+ - Page 248

5-42 ADS TRITON+ Manual
Quantity
Description
ADS P/N
1 as
needed
External Modbus Interface Unit (XBUS)
8000-0427
1 as
needed
External Input and Output Device (XIO)
8000-0400
1 as
needed
External power/communications cable (from
ExPAC to monitor)
8000-0388-xxx
4
1 as
needed
External power grounding kit (
also used to
convert a battery
-powered TRITON+ monitor
to
external power)
8000-0434-xxx
4
1 as
needed
Sampler cable (
for flow proportional sampling
)
8000-0348-01
1 as
needed
Sampler cable (
for level activation sampling
)
8000-0348-02
4
M3 x 10mm flat head machine screws
507820
15
Plastic push mounts
1
3/8 in. -
16 thread. x 2.in. (10mm x 55mm x
1.5mm thread) stainless steel stud
1
3/8 in. – 16
thread (10mm x 1.5mm thread)
stainless steel nut
As needed
3/8 in. (10mm) stainless washer
15
11-in. (5mm x 300mm) cable ties
25
4-in. (2mm x 100mm) cable ties
15
8-in. (4mm x 200mm) cable ties
15
¼-in. (7mm x 400mm) anchor cable ties
1
Models 8000-FST-IM-4WW-XXX include the 12-volt battery pack; Models 8000-
FST-IM-EP-4WW-XXX (for external power) do not include the battery pack.
2
Pressure depth transducers (indicated by -xx- in the sample part number) are
available in Peak Combo Sensors and Surface Combo Sensors 0 – 5 psi (0 - 0.34
Bar), 0 – 15 psi (0 - 1.03 Bar), and 0 - 30 psi (0 - 2.07 Bar) pressure ranges.
Example, a Peak Combo Sensor with a 0 - 15 psi (0 - 1.03 Bar) pressure transducer
would be specified in psi: 8K-CS4--15-35.
3
Extension cables can be ordered to specific lengths up to 300 ft. (91m). Note the
desired length (in feet) in the -xxx-- portion of the part number. Standard lengths
are 10 ft. (3.0m), 25 ft. (7.6m), 50 ft. (15.2m), 75 ft. (22.8m), 100 ft. (30.5m), 125 ft.