ADS TRITON+ - Page 477

Specifications A-5
reading is equal to one reading. Therefore, each total below
represents the actual entities plus one date/time stamp. A
date/time stamp must be included for each monitoring point
associated with the monitor.
Peak Combo
Sensor
AV|Gated
Sensor
Surface
Combo
Sensor
Ultrasonic
Depth Sensor
7
7
6
3
x Deduct 2 to 3 days from the total days of storage to
compensate for additional overhead in memory.
Following is the equation for calculating the total days of storage
available in the monitor memory:
Data Storage Available in the Monitor (in Bytes)
=
Total
Days of
Storage
in the
Monitor
Memory
Number of
Readings
Taken
per
Day for
One entity
X
Memory
Consumed for
One Entity
Reading
(Date
/Time
Stamp)
X
Number of
Entities Logged
by
the Monitor
(based on the
selected
devices)
For example, recording data at a 15-minute sample rate using a
Peak Combo Sensor offers approximately 150 days of data storage.
851,968 bytes
=
158 days (150 when
accounting for
overhead)
96 readings
X
8 bytes
X
7
entities
(including
1 for the date/ time
stamp)