ADS TRITON+ - Page 528

In-12 ADS TRITON+ Manual
wiring the power supply to the
ExPAC, 6-18
XBUS, 1-5, 2-3, 2-12
XIO, 1-5, 2-3, 2-12
power supply
installation, 6-7
mounting to DIN rail, 6-7
installation and wiring, 6-15, 6-18
specifications, A-22
wiring to the AC power cable, 6-
15
wiring to the ExPAC, 6-18
pressure depth
editing sensor device parameters,
4-81
measurement, 2-18, 2-20, 2-28
troubleshooting, 11-68
pressure depth sensor
replacing the desiccant in the dryer
tube, 11-22
replacing the dryer tube, 11-21
securing dryer tube to monitor, 5-
99
processor board, 2-6
Project organization checklist, 2-37
Provider, 4-19
pump station, 5-5
Q
Qstart
analog device parameters, 4-22
assigning and editing devices, 4-
15
AV|Gated device parameters, 4-27
collecting data, how to, 4-100
configuring a location, how to, 4-7
confirmations, 4-96
CSV decimal, 4-3
CSV file delimiters, 4-3
Dat path, 4-3
Data Delivery device parameters,
4-39
data formats, 4-3
date format, 4-3
default location, 4-3
editing devices
AV|Gated Sensor, 4-27
Peak Combo Sensor, 4-50
Surface Combo Sensor, 4-69
firmware updates, 4-103
Modem Setup device parameters,
4-19
port settings, 4-3
Sampler, 4-62
Settings, 4-3
starting Qstart, 4-2
Surface Combo device parameters,
4-69
units of measure, 4-3
updating monitor firmware, 4-103
viewing logs, 4-104
XIO device parameters, 4-84
Qstart
XML
low voltage, 11-9
Modbus, D-2, D-4
Telog Ru-33, D-2
QstartXML
AV|Max device, 4-50
monitor activation, 4-88
Peak Combo device, 4-50
Time Zone device parameters, 4-
83
Qstart
XML XML
Wavelet 4R, D-4
R
regulator
replacement, 11-35
replacing fuses, 11-35
regulator replacement, 11-35
relay outputs
connection, 9-16
repairs
out of warranty, 1-31
replacement
12-volt IS battery pack, 11-12