BYB User Manual Page 34 of 55 PN: 90020 Version: 1.4
Daily Checks
Monthly Checks
Yearly Checks
Confirm all fasteners are in place and tight. (Snap rings, collars, bolts, nuts etc.)
Check that the hoses are not kinked, are clear of the cables and do not hang up on the tank.
All secondary locks move freely and return to home position.
Check all primary locks for free movement and full engagement with leg holes.
Check all hydraulic connections and components for leaks.
Check wiring and switches for damage.
Check columns, cables, runways, and base plates are free of dirt, grease, or damage.
Check cable connections on the top cap and cylinder block.
Grease Zerk fittings.
Wax columns.
Check wire ropes for wear or cracks. (See pg. 37)
Check pump fluid level, refill if low.
Check anchor bolts (if used, See pg. 38).
Check the cylinder is rod and rod end threads for deformation or damage.
Check cylinder mount for looseness and damage.
Empty the pump reservoir and refill with new fluid (See pg. 28).
Thoroughly check each cable (See pg. 37).
are the responsibility of the owner or qualified operator.
may be completed by the owner/qualified operator or trained lift service personnel.
To Next Page
Loading...