BYB User Manual Page 42 of 55 PN: 90020 Version: 1.4
Ramps
Drip Pans
Solid Decks (ALI Certified)
To place the ramps on the lift, lower
the lift to the ground. Hook the ramp
tongue onto the slot on the automatic
wheel stops.
Ramps MUST BE REMOVED during
lift operation to avoid floor or ramp
damage. (PN 40273, Set of 2)
Drip pans rest on the accessory rails.
They are not designed to support any
weight. They should be used to catch
drips, do not fill with fluid, use as a tool
tray, or place anything onto the trays.
As with all plastics an increase in heat
decreases the structural stability of the
tray. (PN 40199, set of 4)
Solid Decks rest on the accessory rails.
They are designed to support 800lbs
across a 10 x 10 section. Do not
overload a deck or the lift capacity.
Place all heavy items on the runways.
(PN 40228 for WB/BB, & WF, PN
40254 for CL & XT)
To Next Page
Loading...