BYB User Manual Page 2 of 55 PN: 90020 Version: 1.4
Safety
Read these safety instructions entirely, Check advantagelifts.com for manual updates. Advantage
recommends reviewing the current version of the ANSI/ALI ALIS “Safety Requirements for
Installation and Service” to provide additional safety information for installing and using your lift.
Additionally, the ALI “Lifting it Right” and “Safety Tips” documents are recommended reading for
every lift operator (autolift.org). For installation reference ANSI/ALI ALOM, “Safety Requirements for
Operation, Inspection and Maintenance”.
Always keep the Installation & Owner’s Manual, ALI Lifting it Right safety manual, and any other
safety instruction accessible. Post these safety tips where they will be a constant reminder to an
authorized lift operator.
The Owner/Employer shall ensure that lift operators are qualified and that they are trained in the
safe use and operation of the lift using the manufacturer's operating instruction; ALI/SM, ALI Lifting it
Right safety manual; ALI/ST ALI Safety Tips card; ANSI/ALI ALOIM (current edition), American
National Standard for Automotive Lifts-Safety Requirements for Operation, Inspection and
Maintenance; ALI/WL Series, ALI Uniform Warning Label Decals/Placards. (autolift.org)
The Owner/Employer shall establish procedures to periodically inspect the lift in accordance with
the lift manufacturer's instructions or ANSI/ALI ALOIM (current edition), American National Standard
for Automotive Lifts-Safety Requirements for Operation, Inspection and Maintenance; and the
employer shall ensure that lift inspectors are qualified and that they are adequately trained in the
inspection of the lift. (pg. 33)
The Owner/Employer shall establish procedures to periodically maintain the lift in accordance with
the lift manufacturer's instructions or ANSI/ALI ALOIM (current edition), American National Standard
for Automotive Lifts-Safety Requirements for Operation, Inspection and Maintenance; and the
employer shall ensure that lift maintenance personnel are qualified and that they are adequately
trained in the maintenance of the lift. (pg. 33)
The Owner/Employer shall maintain the periodic inspection and maintenance records
recommended the manufacturer or ANI/ALI ALOIM (current edition), American National Standard for
Automotive Lifts-Safety Requirements for Operation, Inspection and Maintenance. (pg. 44)
The Owner/Employer shall display the lift manufacturer's operating instructions; ALI/SM, ALI Lifting
it Right safety manual; ALI/ST, ALI Safety Tips cards; ANSI/ALI ALOIM (current edition), American
National Standard for Automotive Lifts-Safety Requirements for Operation, Inspection and
Maintenance; and in the case of frame engaging lifts, ALI/LP- Guide, Vehicle Lifting Points/Quick
Reference Guide for Frame Engaging Lifts; in a conspicuous location in the lift area convenient to
the operator. (autolift.org)
The Owner/Employer shall provide necessary lockout/tagout means for energy sources per ANSI
Z244.1, Safety Requirements for the Lockout/Tagout of Energy Sources, before beginning any lift
repairs or maintenance.
The Owner/Employer shall ensure the lift is not modified in any manner without the prior written
consent of the manufacturer.
To Next Page
Loading...