Advantech-DLoG DLT-V72 Series Manual V2.00 27 / 94
6. Device configuration
Risk of injury and damage due to improper configuration.
These instructions are directed to skilled personnel.
Only qualified skilled personnel (e.g. IT personnel with good knowledge of PCs, operating
systems and wireless networks) may configure the DLT-V72.
If the DLT-V72 is incorrectly configured, the DLoG GmbH warranty for this device will be void.
6.1. General settings
DLT-V72 terminals are configured with the following software tools depending on the installed operating
system:
DLT-V72 with MS Windows: "DLoG Config"
Configured are, for example, automatic shutdown, Wi-Fi status display, front key assignment, network
settings, etc. Start DLoG Config via Start -> Programs or with the icon in the taskbar.
Default password: "gold".
The "DLoG Config Manual" is available in the Download Center at
www.advantech-dlog.com.
DLT-V72 with Android: "MDevice Android"
You can find configuration information on DLT-V72 devices with ADLoG Android™
in the "ADLoG Android™ Manual". You can request this manual from the ADLoG
Helpdesk (see Technical Customer Support).
DLT-V72 with ADLoG Linux: "ADLoG Standard Linux image configuration"
You can find configuration information on DLT-V72 devices with ADLoG Linux in
the "ADLoG Linux Manual". You can request this manual from the ADLoG Helpdesk
(see Technical Customer Support).
To Next Page
Loading...
