EasyManua.ls Logo

Advantech-DLoG DLT-V72 Series - User Manual

Default Icon
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.advantech-dlog.com
Advantech-DLoG
DLT-V72 Series
DLT-V72 Series
Industrial PC
Manual V2.00
Manual

Table of Contents

Questions and Answers

  • R
    Ralph RangelAug 16, 2025
    What to do if nothing is shown on the display, but Power LED is active on Advantech-DLoG DLT-V72?
    • A
      Alisha JohnsonAug 16, 2025
      If your Advantech-DLoG Industrial PC display is blank but the Power LED is on, first, press the backlight key (the one with the "light bulb" symbol). If that doesn't work, try increasing the display brightness using the designated key.
  • K
    Kyle IrwinAug 19, 2025
    What to do if nothing is shown on the display and Power LED does not light up on Advantech-DLoG DLT-V72?
    • S
      Susan HernandezSep 12, 2025
      If your Advantech-DLoG Industrial PC shows nothing on the display and the Power LED doesn't light up, check the power switch, plug connection, power supply cable, and fuse. Also, verify the ignition cable and signal.
  • Q
    qwilsonAug 22, 2025
    How to fix no Wi-Fi connection on Advantech-DLoG Industrial PC?
    • Q
      qcaldwellAug 22, 2025
      If you are experiencing a loss of Wi-Fi connection on your Advantech-DLoG Industrial PC, start by activating the connection in the Control Panel. If the problem persists, check the AP access rights by listing the ACL. Also, verify your Wi-Fi authorization parameters, network, and protocol settings. Finally, assess the signal strength and quality in the software; you may need to expand the network if the signal is too weak.
  • M
    markmillerAug 25, 2025
    How to troubleshoot no network connection on Advantech-DLoG DLT-V72?
    • W
      Warren EstradaAug 26, 2025
      If your Advantech-DLoG Industrial PC has no network connection, start by activating the connection in the Control Panel. If that doesn't resolve the issue, check your network and protocol settings. Also, examine the status LEDs on the RJ45 connection socket, plug connection, and cable.
  • M
    Matthew WellsAug 27, 2025
    What to do if touchscreen reacts imprecisely on Advantech-DLoG Industrial PC?
    • R
      rivasleslieAug 27, 2025
      If the touchscreen on your Advantech-DLoG Industrial PC reacts imprecisely, first, ensure the touchscreen is enabled by pressing the touchscreen on/off button. If the issue persists, try reinstalling the touch driver or adjusting the settings. Note that recalibration via software (Menu Control Panel -> Tablet PC Settings) may result in poorer detection of taps on the screen.
  • M
    Michael HoustonAug 30, 2025
    Why does Advantech-DLoG DLT-V72 Industrial PC lose settings after restart?
    • C
      Caroline DicksonAug 30, 2025
      If the system settings on your Advantech-DLoG Industrial PC are lost after a restart, it may be due to write protection being activated. Deactivate write protection or authorize changes in the operating system. If this doesn't solve the problem, the operating system or image may need to be reinstalled.
  • K
    Kyle Watkins MDSep 2, 2025
    What to do if operating system does not start on Advantech-DLoG Industrial PC?
    • L
      ljonesSep 2, 2025
      If the operating system on your Advantech-DLoG Industrial PC fails to start, remove all external storage devices. If the issue persists, the operating system or image must be reinstalled due to possible damage.
  • C
    Cheryl WilliamsSep 4, 2025
    Why is battery pack run time shorter than specified on Advantech-DLoG DLT-V72?
    • D
      Darius MaloneSep 4, 2025
      If the battery pack run time on your Advantech-DLoG Industrial PC is significantly shorter than specified, first, check the temperature specifications for the device and its surroundings to ensure they are within the necessary range for charging. If temperature is not the issue, the battery pack may have reached its maximum number of charging cycles, in which case you should replace it with an original battery pack from Advantech-DLoG.
  • C
    Christina BrownSep 7, 2025
    What does it mean if nothing is shown on the display, Temp LED is active on Advantech-DLoG DLT-V72?
    • A
      Amy RiveraSep 7, 2025
      If your Advantech-DLoG Industrial PC displays nothing and the Temp LED is active, it indicates that the operating temperature limits have been exceeded or undershot. Wait until the device has cooled down or warmed up to the appropriate temperature range.
  • M
    Matthew MyersSep 10, 2025
    Why is software keyboard not functioning on Advantech-DLoG DLT-V72?
    • P
      probinsonSep 10, 2025
      If the software keyboard is not functioning on your Advantech-DLoG Industrial PC, ensure that you have entered the correct software license, as a missing or invalid license could be the cause.

Advantech-DLoG DLT-V72 Series Specifications

General IconGeneral
RAM4 GB
ConnectivityWi-Fi, Bluetooth
IP RatingIP65
TouchscreenYes
Operating Temperature-20°C to 60°C
System Memory4 GB
Display TypeTFT LCD
Storage64GB SSD
Operating SystemWindows 10 IoT Enterprise
Serial Ports2
USB Ports2 x USB 3.0
Ethernet1 x GbE
Power Input9-36V DC
Power Supply9 ~ 36 VDC
Display Size12.1 inches

Related product manuals