Advantech-DLoG DLT-V72 Series - 13.3. Regular Checks and Maintenance of the Complete System; Replacing the Battery Pack; Cleaning the DLT-V72

Maintenance
Advantech-DLoG DLT-V72 Series Manual V2.00 83 / 94
13.3. Regular checks and maintenance of the complete system
To ensure the stability and security of the DLT-V72 complete system:
 Regularly check whether the DLT-V72 is firmly seated in the associated holder (RAM mount,
mounting bracket) and the mounting screws are not loose.
 Also check whether the bracket is secured stably to the respective deployment location.
This is particularly important if the DLT-V72 is installed on a vehicle.
 Check whether all connected cables are secured and the cable cover shuts tightly.
WARNING
Risk of accident due to unstable attachment of the DLT-V72 to vehicles.
If the attachment of the DLT-V72 becomes loose and breaks during driving, this can lead to
severe accidents.
 Perform the attachment checks described above at regular intervals.
13.4. Replacing the battery pack
See section 12.1 Integrated UPS (optional)
13.5. Cleaning the DLT-V72
WARNING
Hazardous voltage, electric shock from contact with live parts when cleaning the
device.
To prevent an electric shock while cleaning the device:
 Switch off the DLT-V72 before cleaning.
 Disconnect from the power supply.
 Disconnect connected accessories.
NOTICE: Physical damage
Cleaning the touchscreen and housing:
 Never use chemical solvents to clean the touchscreen.
 Do not use acidic or alkaline solutions.
 Do not use cleaning agents that contain ammonia or sulfur (tile cleaners, for example,
contain ammonia).
 Do not use any abrasive glass cleaner or cloths that could scratch the touchscreen.