84 / 94 DLT-V72 Series Manual V2.00 Advantech-DLoG
Cleaning the housing
Ensure that the DLT-V72 is switched off and currentless.
Clean the housing with a slightly dampened cloth.
Do not use compressed air, a high-pressure cleaner or vacuum cleaner, as this can damage the
surface.
Using a high-pressure cleaner poses the additional risk of water entering the device and damaging
the electronics or display.
Cleaning the touchscreen
Device with PCT touchscreen: Switch off the device completely.
Device with resistive touchscreen: Deactivate the touchscreen:
Use a neutral glass cleaner without ammonia or isopropyl alcohol applied to a lint-free cloth.
ATTENTION: Do not apply cleaning agent to the touchscreen; apply it to the cleaning cloth
Then wipe off the touchscreen with it.
To Next Page
Loading...
