Advantech-DLoG DLT-V72 Series Manual V2.00 7 / 94
2. Functional description
2.1. Intended use
Fig. 2.1: DLT-V72 device examples with optional mounting bracket
The DLT-V72 industrial PCs are data
communication terminals for use in commercial
environments (e.g. logistics, warehousing,
manufacturing). Any other or additional use
beyond this shall be deemed an improper use.
The user/operator of the DLT-V72 is solely
responsible for any resulting damage. This also
applies to any unauthorized modifications made
to the device.
Intended use includes the compliance with the environmental conditions permitted for the device (e.g.
ambient temperature -30 °C to +50 °C) and specifications (e.g. DC power supply unit 12/24/48 VDC) as
well as compliance with all safety Instructions.
The DLT-V72 industrial PCs:
− are not approved for use in EX zones (potential explosion hazard).
− are not approved for use on ships.
− are not approved for use on rail vehicles
− are not approved for use in life-support systems or critical safety systems where system
malfunction can lead to the direct or indirect endangerment of human life.
Only use accessories that have been tested and approved by Advantech-DLoG for the respective DLT-
V72. Otherwise, any DLoG GmbH warranty for this device will be void.
2.1.1. Requirements for safe operation
The requirements are:
− Proper transport and storage.
− Proper setup and use.
− Proper maintenance and service.
− Operation by trained personnel.
2.1.2. Permitted environmental conditions
DLT-V72 industrial PCs may only be used under specified environmental conditions.
See section 11.2 Environmental conditions.
To Next Page
Loading...
