Advantech-DLoG DLT-V72 Series - Preparations; Material Required

Electrical installation, cable connection, cable cover
Advantech-DLoG DLT-V72 Series Manual V2.00 41 / 94
8.2. Preparations
 Lay out ready all cables that are to be connected to the DLT-V72.
 Select the appropriate slots on the connector panel of the DLT-V72.
 Test in which order the cables best fit in the cable compartment.
8.2.1. Material required
Cable sealing set (scope of delivery: cable cover)
Cable cover and rubber seal
Cable clips Screws
Tools
− Hexagon screwdriver, size 3
− Philips screwdriver, size 3
− Torque wrench
− Allen wrench, size 2.5
− Flat head screwdriver, size 0
− Socket wrench, size 7