AMT-70/AMT-73/AMT-75 Installation and Operation
Figure 11: The AMT-70 Front Panel
Figure 12: The AMT-73L Active Front Panel
61
LED Status Description
BUC Power: Green Indicates that the BUC power is enabled
LNB Power: Green Indicates that the LNB power is enabled
Transmit On: Green Indicates that the modulator is transmitting.
RX 1 Fault: Red / Off Indicates that the demodulator channel 1 is not locked to a
received signal (if OFF the channel is locked).
RX 2 Fault: Red / Off Reserved
TX Fault: Red Indicates that the modulator is not transmitting, due to a fault
(or user intervention).
Prime Power Green Indicates that the power supply current is received by the
management card.
Transmit Fault
Receive Fault
Receive Lock
Prime Power
Transmit On
Transmit Fault
Receive Fault
Receive Lock
Prime Power
Transmit On
Transmit Fault
Receive Fault
Receive Lock
Prime Power
Transmit On
Transmit Fault
Receive Fault
Receive Lock
Prime Power
Transmit On
To Next Page
Loading...