AMT-70/AMT-73/AMT-75 Installation and Operation
95
Alternatively, the log messages can be browsed on the front-panel using the option MONITOR/LOG.
If the LOG file needs to be kept the command;
# savelog
↵
can be used to save the log on flash.
Typically, the log is kept when you want to upload the file from the modem. Use FTP, set the directory
to “/sbin” directory in binary mode with the command “get logfile”. When the modem is shutting down+
with the command “reboot m” the logfile is automatically saved on flash and restored for the next
“reboot”.
Finally, the logfile can be cleared using the command;
# clearlog RESET
↵
while the modem is operational.
To Next Page
Loading...