Overview of Components
Chapter
2
AfiMilk MPC Installation Manual
19
Afimilk MPC Options
Each Afimilk MPC body is connected to the control unit via a connection box or by any
other means ensuring connections protection. Afimilk MPC body incorporates integrated
cables, connecting its sensing probes and electronic solenoid to the control unit inside
Afimilk MPC control box. Afimilk MPC control box cables and Afimilk MPC body cables are
both available at different lengths according to the requirements of installation (Distance
between components). Some lengths of the Afimilk MPC control box cable are not stock
items, but may be manufactured per order. These are marked with an asterisk.
Afimilk MPC may be ordered with one of two inlet port diameter options according to the
milk hose in use (cluster size).
Ordering Afimilk MPC
This chapter explains how to order a milk meter with the desired lengths of cables. The
standard configuration of Afimilk MPC offers:
o 5/8 inch inlet port diameter.
o 2m long Afimilk MPC control box cable.
o 3.5m long body cable (probes and valve).
Part number 4498999 is used for ordering the standard configuration of Afimilk MPC
described above.
Different cable lengths may be ordered by
adding suffix letters to the part number as
explained in this diagram.
Afimilk MPC can also be ordered with a non-
standard larger inlet port. Add I suffix before the
cable length suffixes to order the product with a
7/8 inch inlet port diameter.
Example: 4498999IAC will be:
o I= 7/8 Inlet
o A= 2m Control box cable
o C= 10m body cables
To Next Page
Loading...