Mounting Components
Chapter
4
AfiMilk MPC Installation Manual
23
Mounting Components
This chapter describes the following installation procedures:
o Mounting the Afimilk MPC Control Box
o Mounting the Afimilk MPC Milk Meter Body
o Installing milk meter body Vacuum and Clean-air service Lines
Mounting Afimilk MPC Control Box
Afimilk MPC control box is mounted to the milking parlor metalwork at a stable secure
location.
o At or above eye level, allowing easy access to its keypad for regular operation.
o At a protected location, with minimum exposure to cows, manure and water.
There are two common mounting options, depending on the metal work design of the
milking parlor:
o Cabinet Type – in such parlors, control units are usually mounted at cutouts in the
cabinets for flush mounting appearance.
o Other Types – Control units attached to a pole or railings part of the frame with an
external bracket.
The table at the following page outlines mounting and bracket options when using Afimilk
MPC brackets.
Connecting the display to an unstable surface may result in
breakage of the control panel housing. It is the customer's
To Next Page
Loading...