Chapter
4
Mounting Components
AfiMilk MPC Installation Manual 24
Table 1: Bracket Mounting Options
The Afimilk MPC mounting bracket and
brace (for clamping the mounting bracket
to a stanchion) (P/N 5001720) can be
used to support control boxes. This
assembly is ordered separately.
An Afimilk MPC C.B. Bracket (P/N
5001731) secured to a mounting bracket
that is welded to a stanchion. Afimilk MPC
C.B bracket is supplied with every milk
meter.
An Afimilk MPC bracket secured to a flat
surface
The Afimilk MPC bracket may also be
secured to a stanchion or rail. Use this
technique only if necessary. If using this
method, and if a cable is inside the
stanchion or rail, make sure that the
anchor screws do not damage the cable.
Side view of an Afimilk MPC control box
mounted on a flat rail.
To Next Page
Loading...