Mounting Components
Chapter
4
AfiMilk MPC Installation Manual
25
High Protection Cutout in cabinets
This mounting method is highly recommended since it provides Afimilk MPC Control Box
with best protection against water and mechanical damage. The concept of such
mounting technique is creating cutouts, shaped per the face of Afimilk MPC control unit,
in the front of the cabinet at every milking point.
Securing the control unit to the cabinet is achieved by means of U shape bracket fastened
from the inner side of the cabinet.
The following figures outline cutout shape and dimensions. If required, afimilk may
supply (Per request) an engineering machining file for creating the cutout.
To achieve precision in cutout dimensions, laser OR C.N.C. technology
is highly recommended.
To Next Page
Loading...