Operation
Agilent 55B AA Spectrometer User’s Guide 71
To load/modify an existing user method:
1 Press the Load Method button.
2 Select ‘User’ methods and press Enter.
3 Select the method you wish to use.
4 Modify the method as required.
To customize a method:
1 Load the cookbook or user method for the required element and modify the
parameter settings as necessary. The following sections include instructions
on setting the various parameters.
2 Save the method on the Instrument Parameters page.
Save/Delete methods
Methods are saved on the Instrument Parameters page. There are 30 slots
available for customized methods. Slots that are occupied are displayed on the
Load Method page. A method can be saved into any slot, even if the slot is already
occupied by an existing method. The existing method will be overwritten by the
new method (without a request for confirmation).
To save a method:
1 Press the Instrument Parameters button.
2 Move the highlight to the ‘Save Method’ option and press Enter.
3 Select an empty position and press Enter.
The method will be saved in the selected slot, with the slot number and method
element displayed in the list.
To delete a method:
1 Press the Instrument Parameters button.
2 Move the highlight to the ‘Delete Method’ option and press Enter.
3 Move the highlight to the method in the list to be deleted and press Enter. The
method will be deleted, leaving an empty slot in the list.
To Next Page
Loading...
Need help?
General
