Agilent Technologies 5975 Series Hardware Installation

General Information 1
Hardware Installation 13
Safety and Regulatory Certifications
The 5975 Series Mass Selective Detector conforms to the following safety
standards:
• Canadian Standards Association (CSA): CAN/CSA—C22.2 No. 61010–1–04
• CSA/Nationally Recognized Test Laboratory (NRTL): UL 61010–1
• International Electrotechnical Commission (IEC): 61010–1
• EuroNorm (EN): 61010–1
The 5975 Series Mass Selective Detector conforms to the following regulations
on Electromagnetic Compatibility (EMC) and Radio Frequency Interference
(RFI):
• CISPR 11/EN 55011: Group 1, Class A
• IEC/EN 61326
• AUS/NZ
This ISM device complies with Canadian ICES-001. Cet appareil ISM est
conforme a la norme NMB—001 du Canada.
The 5975 Series Mass Selective Detector is designed and manufactured under
a quality system registered to ISO 9001.
Information
The Agilent Technologies 5975 Series Mass Selective Detector meets the
following IEC (International Electro-technical Commission) classifications:
Equipment Class I, Laboratory Equipment Installation Category II, Pollution
Degree 2.
This unit has been designed and tested in accordance with recognized safety
standards and is designed for use indoors. If the instrument is used in a
manner not specified by the manufacturer, the protection provided by the
instrument may be impaired. Whenever the safety protection of the 5975
Series Mass Selective Detector has been compromised, disconnect the unit
from all power sources and secure the unit against unintended operation.

Agilent Technologies 5975 Series Specifications

General

Brand	Agilent Technologies
Model	5975 Series
Category	Laboratory Equipment
Language	English