8 Hardware Installation
1 General Information
Introduction
This document provides installation instructions for the Agilent Technologies
5975 Series Mass Selective Detector (MSD). Installation must be performed by
an Agilent Technologies service representative.
The Agilent Technologies 5975 Series Mass Selective Detectors (MSDs) are
turbo pump MSDs.
The 5975 Series MSD system consists of:
• 5975 Series MSD
• Optional G3397A High Vacuum Gauge controller (required for CI operation)
• Gas Chromatograph
6890 Series GC, with options for MSD use
7683 Automatic Liquid Sampler (optional)
• Computer and MSD ChemStation software
Refer to your MSD ChemStation documentation for additional information
Table 1 lists possible configurations for the 5975 Series MSD. Figure 1
identifies many of the common parts.
To Next Page
Loading...
