Agilent Technologies 5975 Series User Manual

6 5975/5977 Series MSD Operating Manual
To Install a Capillary Column in the GC/MS Interface Using a
Standard Column Nut 41
To Install the Interface Tip Seal 44
To Calibrate Column Flow Linear Velocity 46
The GC/MSD Interface for a 7890B Series GC 49
3 Intuvo 9000 GC Column Maintenance
Columns 52
Conditioning columns 53
Tips and hints 53
Handling the Intuvo 9000GC Column and Bus
Components 54
To Replace an Intuvo GC Column 55
To Replace an Intuvo 9000 GC Gasket 59
To Install a Column Guard or Jumper Chip 60
To Replace the 9000 GC/MS Tail 64
To Condition an Intuvo Capillary Column 68
To Install the Interface Tip Seal 70
The GC/MS Interface for a 9000 Series GC 72
4Operating in EI Mode
Operating the MSD from the DS 76
Operating the MSD from the GC Control Panel 77
Configuring the MSD Through the Web User Interface
(WUI) 81
To change the network settings of the MSD 81
Operating the 5975/5977 MSD From the Local Control Panel
(LCP) 84
Modes of operation 84

Agilent Technologies 5975 Series Specifications

General

Brand	Agilent Technologies
Model	5975 Series
Category	Laboratory Equipment
Language	English