4 Basic Operation
Setting Up and Running an Acquisition Method
Agilent 6475 Triple Quad LC/MS System User Guide 56
c Enter the Additional Information. If needed, change the value of the
parameters in the Additional Information list.
Run a Data Analysis method from this window by selecting Both
Acquisition and DA or Acquisition Only for the Part of Method to run. In
addition, you have to set Override DA method to indicate which Data
Acquisition method contains the DA (Data Analysis) method to execute.
You always have to do this.
d To start the single sample run, click Run in the Sample Run window.
The single sample can be run in either locked or unlocked mode. When the
mode is locked, no one can change the method or sample parameters
during a run. You also cannot overwrite this data file in the Data Acquisition
program. The Lock button in the main toolbar indicates that locked mode
is on.
11 Set up and run worklists.
a Click Worklist to show the Worklist window.
b Click Add Multiple Samples . The Add Multiple Samples dialog box
opens.
c Enter all the information on the Sample Information tab.
To Next Page
Loading...
