ALS and Detector Symptoms 2
Troubleshooting 17
Vial Mishandled by ALS
Refer to your sampler installation manual for additional
information.
When you find a mishandled sample vial, do the following:
• Check for folds or wrinkles in the crimp cap, especially
near the neck of the sample vial.
• Use Agilent- recommended sample vials.
• Check sample labels (if applicable).
• Check that they are the correct size.
• Verify that the labels do not interfere with the gripper.
• Check that the tray vial racks are clean and snapped into
the tray base.
To Next Page
Loading...
